Dyson DC15 Service Manual

service manual
Issued 05/05
Introduction
Variants
Specifications
Electrostatic discharge
Electrical testing
Electrical circuit & resistance values
Electrical fault diagnostic
Product overview
Technical information
General notes
Removing the cleanerhead and yoke assembly
Removing and dismantling the yoke assembly
Dismantling the cleanerhead
Assembling the cleanerhead
Assembling and refitting the yoke assembly
Refitting the cleanerhead
Removing the ball and motor bucket
Dismantling the motor bucket
Assembling the motor bucket
Refitting the motor bucket and ball
Removing and dismantling the axlestand
Removing the stabiliser
Refitting the stabiliser
Assembling and refitting the axlestand
Removing and dismantling the valve cuff and valve seal
Assembling and refitting the valve cuff and valve seal
Removing and dismantling the valve assembly
Assembling and refitting the valve assembly
Removing the powercord assembly and switches
Refitting the powercord assembly and switches
Removing and refitting the internal cable
Removing and refitting the PCB to yoke loom
Dismantling the duct assembly
Hose/u-bend and wand assemblies
Cyclone and bin assemblies
Assembling the duct assembly
Fitting notes
Cleanerhead and yoke assembly
Duct, valve and stabiliser
Motor bucket and ball
Cyclone, bin, wand and hose/u-bend assemblies
Parts
6
8
9
2
1
1
2
PAGE
13
24
20
19
17
30
29
28
27
26
35
34
33
32
31
37
36
42
42
41
45
3
48
47
46
39
38
22
4
5
6

Dyson DC15 Specifications

General

Type	Upright
Ball Technology	Yes
Cord Length	35 ft
Filter Type	HEPA
Filter	Lifetime HEPA
Special Features	Ball technology
Cyclone Technology	Root Cyclone™ technology