Dyson DC15 Service Manual

service manual
Issued 05/05
13
Fitting notes
Assembling the cleanerhead
Carefully peel the bumper rubber out of
the bumper.
Lower the bumper rubber into the location
slots at the front of the brush housing.
Align the screw bosses on the bumper with
the holes on the brush housing. Firmly press
until the catches clip into position.
Refit the brushbar motor front mount into the
brush housing.
38
41
40
39

Dyson DC15 Specifications

General

Type	Upright
Ball Technology	Yes
Cord Length	35 ft
Filter Type	HEPA
Filter	Lifetime HEPA
Special Features	Ball technology
Cyclone Technology	Root Cyclone™ technology