E-Mu MP-7 command station - Song Mode; Song Play; Song Step Recording

104 E-MU Systems
Sequencer
Song Mode
Song Mode Song mode is selected by pressing the Song mode button beneath the
liquid crystal display. The screen shown below is displayed in Song mode.
See “Songs” on page 53.
Song Play Pressing Play in Song mode causes the selected song to play.
Pressing the Stop button stops the song immediately. Pressing
Stop again rewinds the song to the beginning (RTZ). Pressing Stop
a third time reloads the initial setup information for the Song.
Song Step Recording As described on page 53, songs can be recorded in two ways. Step recording
involves inserting pattern play events into the song track to form more
intricate arrangements of patterns.
 To Step Record a Song
1. Press the Song mode button. The screen shown below appears.
2. Select a Blank song to begin recording using the data entry control.
3. Press the Record button twice to select Step Record mode. The Step
record LED illuminates and the screen shown below appears.
:150 M: 04 / 4 Bar: 001 . 1
000
0
Start of IT
:150 M: 04 / 4 Bar: 001 . 1
000
0
Start of IT
Song Tempo
(if song events selected)
Song Meter Current Location
Song Name
S
01 STEP Ln: 04 Bar:001
-----------NONE-----------
Current
Position
Step Contents
(None, Stop, Pattern)
Step
Length
Song Step
Number