MP-7 Owners Manual 119
Sequencer
Song Edit Menu
Copy Track to
Clipboard
A section of a track can be copied and held on a digital “clipboard” so that
it can be pasted into another location on the song track. This function
makes a digital copy of the track and places it on the clipboard, where it
will be held until it is replaced with another cut or copy operation, or the
power to MP-7 is turned off. The copied Paste functions.
Pattern Play events are NOT affected by the copy operation. Pattern play
events must be edited using Step Record.
To Copy a Track
1. Select the pattern you wish to edit.
2. Press the Pattern Edit button.
3. Scroll to the Copy Track to Clipboard screen shown below using the
data entry control.
The Track Number
cannot be changed in a Song
since there is only one track.
4. Select the Start Bar and the Length (in bars) to be copied. The Home/
Enter LED will be flashing once the cursor is moved to the lower line of
the display.
5. Press Enter to copy the track. Press any other menu button to Cancel
the operation.
Song Track
The copied section is placed on the clipboard leaving the song
track intact and untouched.
COPY TRACK TO CLIPBOARD
Track: 1 Bar:06 Len:07
To Next Page
Loading...