MP-7 Owners Manual 57
Sequencer
Pattern Mode
Recording triplets is easy since there are four triplet modes (1/4t, 1/8t, 1/16t
and 1/32t). You can also switch between triplet and non-triplet modes to
record complex polyrhythms.
When Input Quantize is turned Off, you are recording in MP-7’s high
resolution mode in which beats can be placed on any one of 384 ticks per
measure. High resolution recording is great if you’re a good player and want
your performance captured as accurately as possible.
To Set Input Quantize
Input Quantize only works in Pattern mode.
1. Choose Pattern mode and select a Pattern.
2. Go into Record mode by pressing the Record button. The Pattern
Record screen shown below appears.
3. Choose the desired Input Quantize value using the data entry control.
4. Press Play to begin recording.
Count In The Count-in feature lets you hear the metronome for either one or two
measures before recording begins. This helps you get the feel of the beat
before you actually begin recording.
To Set Count-in
1. Choose Pattern mode and select a Pattern.
2. Go into Record mode by pressing the Record button. The Pattern
Record screen shown below appears.
3. Move the cursor underneath the Count-in (Cnt) field using cursor keys.
4. Select 0, 1, or 2 bars of count-in using the data entry control.
5. Press Play to begin recording.
T
01 REC+ Ln: 08 Bar: 01. 1
Quan: 8 Met: on Cnt: 0
Note
Value
T
01 REC+ Ln: 08 Bar: 01. 1
Quan: 8 Met: rec CntIn: 0
Count-inMetronome
To Next Page
Loading...