MP-7 Owners Manual 129
Sequencer
Live Performance Features
To Use Mute Hold while a Pattern is Stopped
1. Select a pattern.
2. Change the track mutes as desired.
3. Hold the Tap button and select a new pattern using the data entry
control.
4. The track mute settings of the previous pattern will remain in effect.
To Use Mute Hold in conjunction with Direct Pattern Access
1. Follow the instructions on page 139 to set up direct pattern access.
2. Select a pattern.
3. Change the track mutes as desired.
4. Hold the Tap button while selecting a new pattern using the trigger
buttons. (Triggers must be selected in the Command Function section.)
5. The track mute settings of the previous pattern will remain in effect.
Loop Section
See “Loop Section” on page 75.
Restart Pattern Fire Key
See “Restart Pattern Fire Key” on page 55.
Pattern Change Tempo Hold
See “Pattern Change Tempo Hold” on page 160.
Hold TAP while selecting
a new Pattern with the
Data Entry Control
to hold the Mute settings.
While the
Pattern is
Stopped:
Hold TAP while selecting
a new Pattern with the
Trigger Buttons to
hold the Mute settings.
Direct
Pattern
Access:
To Next Page
Loading...