E-Mu MP-7 command station - Poly Pressure Edit; Poly Pressure Screen; Program Change Edit; Program Change Screen

124 E-MU Systems
Sequencer
Song Edit Menu
Poly Pressure Edit
Polyphonic pressure messages are assigned on a per not basis and have
range of 0-127. MP-7 can generate polyphonic pressure messages, but it
cannot receive them.
Program Change Edit
Program change numbers from 0-127, and on any bank number, can be
inserted, deleted or edited in this screen. If you do not select bank numbers
(off), the program change will be sent to the currently selected bank. See
“Bank Select Commands” on page 196.
 To Edit a MIDI Event
1. Select the pattern you wish to edit.
2. Press the Pattern Edit button.
3. Scroll to the Event List Editor screen shown below using the data entry
control.
4. Press the Enter button as prompted by the display to begin editing.
5. Press the right Cursor button to move the cursor underneath the Event
Scroll Field (<->).
T
01 EVENT <-> 002.03.004
C01 polypress: C1 62
MIDI
Note
Poly Pressure
Value
Poly Pressure Screen
T
01 EVENT <-> 003.02.026
C01 prog: 10 m:off l:off
Bank
Number MSB
cc:0
Program
Change
Number
Bank
Number LSB
cc:32
Program Change Screen
T
01 EVENT <-> 002.03.008
event: mute Trk:02