MP-7 Owners Manual 123
Sequencer
Song Edit Menu
Event List Editor Continuous controller, pitch wheel. mono pressure, poly pressure, track
mutes and program change MIDI messages can be edited, inserted or
deleted using this menu. Place the cursor underneath the “Event Scroll
Field” shown below and turn the data entry control to navigate
through events.
The event list editor also allows you access to the Conductor Track which sets
the tempo and meter for the pattern.
Hold the Enter button and turn the data entry control to scroll through
events when the cursor is on any other field.
• Erase button - - - - - Erases the currently selected event.
• Repeat button - - - - Duplicates the currently selected event, allowing
you to edit and create a new event.
1) Press Repeat.
2) Change the time, channel, or MIDI event.
• Note: You cannot have two events with the exact same time and data in
a pattern. MP-7 will delete any duplicate events as soon as you incre-
ment the event or exit the screen.
Continuous Controller Edit
Continuous controller numbers 1-95 can be edited. Continuous controllers
and Channel Pressure messages may range in value from 0-127.
Pitch Strip Edit
PitchStrip messages are bidirectional and may range in value from -8192 to
+8191.
T
01 EVENT <-> 002.03.008
C01 controller #1
v:52
Track 01
MIDI
Channel
Event
Type
Event
Value
Time Location
Event Scroll Field
(scroll though events)
Continuous Controller Screen
Controller
No. Field
T
01 EVENT <-> 002.03.004
C01 pitch strip: -49
Bidirectional Pitch Value
Pitch Strip Screen
To Next Page
Loading...