Proteus
operation manual
118
MIDI SPECIFICATIONS
MIDI Specifications
RECEIVED CHANNEL COMMANDS
Channels number (n) = 0-15. Message bytes are represented in hex. All
other numbers are decimal.
Command Message Comments
Note Off 8n kk vv release velocity is ignored
Note Off 9n kk vv velocity 0 = note off
Key Pressure An kk pp
Program Change Cn pp
Channel Pressure Dn pp
Pitch Wheel En ll mm l = lsb, m = msb
Realtime Controller Bn cc vv cc = 00-31
Footswitch Bn cc vv cc = 64-79, vv ≥ 64 = on
Volume Bn 07 vv
Pan Bn 0A vv 0 = hard left, 127 = hard right
Reset All Controllers Bn 79 00 ignored in omni mode
All Notes Off Bn 7B 00 ignored in omni mode
Omni Mode Bn 7D 00 forces all notes & controls off
Mono Mode Bn 7E 00 forces all notes & controls off
Poly Mode Bn 7F 00 forces all notes & controls off
To Next Page
Loading...
