Proteus operation manual
10
SUB 2
SUB 1
MAIN
IN OUT THRU
LLLR
STEREOMONO
MIDI
OUTPUTS POWER
RR
Sub 2 Outputs
Sub 1 Outputs
Main Outputs
MIDI Out
MIDI Controller
(MIDI Keyboard, Sequencer, etc.)
Computer
MIDI In
MIDI In
Additional
MIDI
Devices
MIDI Switcher
MIDI Out
Out In
Out
OutInIn
Connection Instructions - Studio Setup
MIDI In
- In this setup, Proteus is controlled by MIDI messages received
at the MIDI In connector which have been routed by a MIDI switcher. The
MIDI switcher allows any MIDI controller such as a MIDI keyboard,
MIDI wind controller, or a computer to be easily connected.
MIDI Out
- The MIDI Out jack is normally used to transmit program data
to a computer or other device.
Outputs
- Proteus has three sets of programmable stereo outputs; Main,
Sub 1, and Sub 2. Specific Proteus instruments can be routed to one of
these stereo pairs in order to be further processed or mixed separately.
Setup #2 STUDIO SETUP
To Next Page
Loading...
