E-Mu Proteus - Crossfade Direction; Crossfade Balance

EDIT MENU
50
Proteus operation manual
CROSSFADE DIRECTION
This function determines the polarity of the crossfade or cross-switch.
The direction is either primary ➝ secondary, or secondary ➝ primary.
XFADE DIRECTION
Pri -> Sec
CROSSFADE BALANCE
The crossfade balance parameter determines the initial balance between
the primary and secondary layers. Any modulation is subsequently
added to this value. Crossfade balance is variable between 000 and 127.
XFADE BALANCE
064
Crossfade Direction
Crossfading between Primary and Secondary instruments will occur between the values of 12
and 52. Above and below these points, the output will be completely Primary or Secondary.
Primary
Only
CROSSFADE
AMOUNT
40
Secondary
Only
Equal
Amount
12864032 96
CROSSFADE
BALANCE
32
INPUT
CROSSFADE
12 52
PRIMARY
AMOUNT
SECONDARY
AMOUNT
Velocity,
Mod. Wheel,
Footpedal,
etc.
■
A Crossfade Balance
setting of 000 would be
appropriate with a
source such as a
modulation wheel or
footpedal which only
change the value in a
positive direction.