E-Mu Proteus - Coarse Tuning Adjustment

EDIT MENU
46
Proteus operation manual
COARSE TUNING
This function allows you to change the tuning of the primary and
secondary instruments in semitone intervals. The coarse tuning range is
-36 to +36 semitones. A coarse tuning setting of "00" would indicate that
the instrument is tuned to concert pitch (A=440 Hz).
TUNING coarse
pri:+00 sec:+00
FINE TUNING
This function allows you to change the tuning of the primary and
secondary instruments in 1/64 semitone intervals (approx. 1.56 cents).
The fine tuning range is ± 1 semitone.
TUNING fine
pri:+00 sec:+00
CHORUS
Chorus “thickens” the sound by doubling the sound and then detuning
it. Proteus/1 chorus can be only be turned On or Off. Proteus/2 and above
allow you select the chorus amount from a range of 1 to 15. When Chorus
is on, the number of channels used by an instrument will be doubled.
CHORUS CHORUS
pri:On sec:Off pri:Off sec:07
DELAY
Delay varies the time between when a MIDI Note On message is received
and the onset of a note. The delay time is adjustable from 0 to 13 seconds
(000-127).
DELAY
pri:000 sec:000
Coarse Tuning
Proteus/1 Proteus/2 and above