E-Mu Proteus - Footswitch Control; MIDI Controller Amount; Pressure Amount

EDIT MENU
56
Proteus operation manualFootswitch Control
FOOTSWITCH CONTROL
This function allows you route the 3 footswitch controllers (1, 2 or 3) to
any of the footswitch destinations. The footswitches can be routed to
switch: Sustain (pri/sec/both), alternate volume envelope (pri/sec/
both), alternate volume release (pri/sec/both), or cross-switch between
the primary and secondary instruments.
FOOTSWITCH CTL
1 -> Sustain
MIDI CONTROLLER AMOUNT
This function allows you to specify an amount parameter (variable from
-128 to +127) for each of the MIDI controllers.
CONTROLLER AMT
A:+127 B:-090
CONTROLLER AMT
C:+127 D:-090
PRESSURE AMOUNT
This function allows you to specify an amount parameter for mono or
poly keyboard pressure data. The pressure amount is variable from -128
to +127.
PRESSURE AMOUNT
+127