E-Mu Proteus - Reverse Sound Function

EDIT MENU
47
Proteus operation manual Solo Mode
SOLO MODE
Solo mode provides the playing action of a monophonic instrument with
single triggering and last-note priority. This mode does not allow you to
play a chord. Solo mode will not retrigger the envelope generators if a
new note is played while another is being held. This allows a legato
playing technique to be used. Solo mode also provides more realistic
effects when working with guitar and wind controllers.
SOLO MODE
pri:Off sec:On
SOUND START
This function allows you to set where a sample begins playing when you
hit a key. A setting of 000 plays a sound from the beginning, higher values
move the sample start point toward the end of the sound.
SOUND START
pri:000 sec:000
REVERSE SOUND
When reverse sound is turned On, the instrument will be played back-
wards. When an instrument is reversed, any loops in the sound will be
ignored, which means that the sound will not sustain indefinitely.
REVERSE SOUND
pri:Off sec:On