E-Mu Proteus - LFO 1 Shape and Amount Control

EDIT MENU
51
Proteus operation manual Crossfade Amount
CROSSFADE AMOUNT
The crossfade amount parameter determines the range over which
crossfading will occur. Crossfade amount is variable from 000 to 255. The
larger the value, the more modulation will be required to effect a complete
crossfade.
XFADE AMOUNT
128
CROSS-SWITCH POINT
The cross-switch point parameter determines the point at which cross-
switching will occur when key position or velocity is controlling cross-
switch.
SWITCH POINT
064 c#2
LFO 1 - SHAPE and AMOUNT
This screen controls the waveshape and amount of Low Frequency
Oscillator 1. The LFO can be used to produce vibrato (when routed to
pitch), or tremolo (when routed to volume). The five LFO waveshapes
are: Triangle, Sine, Square, Sawtooth, and Random. The amount can be
varied from -128 to +127. Negative values will produce inverted wave-
shapes.
LFO1 SHAPE AMT
Rand +127
Triangle
Square
Sine
Sawtooth
Random
Velocity
Key