EDIT MENU
60
Proteus operation manual
SAVE PRESET
Changes made to a preset in the Edit menu are not made permanent until
the preset is Saved. To save a preset, move the cursor to the bottom line and
select the location for the new preset with the data entry control. The Enter
LED will be flashing. Pressing the Enter switch will confirm the opera-
tion. Any user preset (64-127) may be selected using the data entry
control. Writing to a user preset erases the existing preset in that location.
Make sure that the destination preset does not contain information that
you wanted to keep.
SAVE PRESET to
064 Preset Name
To Save a Preset:
1. Select the new location
2. Press Enter
Save Preset
To Next Page
Loading...
