EasyManua.ls Logo

EasyWay 210 - User Manual

EasyWay 210
157 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the EasyWay 210 and is the answer not in the manual?

Summary

WARNING

TECHNICAL DATA OF THE ACTUATOR

Dimensions and Use Restrictions

Details gate dimensions, leaf dimensions, and climate conditions affecting use.

INSTALLATION

Double-Leaf Gate Configuration

Explains the distinction between leaf 1 and leaf 2 for proper gate functioning.

Actuator Installation Dimensions

Specifies required distances for actuator placement on posts to prevent collisions.

Rear Bracket Placement on Posts

Guides on setting the rear bracket position on brick, block, or metal posts.

Front Connector Placement

Instructions for positioning the front connector if holes are not pre-provided.

Front Connector Fastening Types

Details methods for fastening the connector to gates with or without pre-drilled holes.

Installing the Actuator Arm

Steps for attaching the actuator arm to the gate mechanism.

Mechanical Limit Switches Installation

Procedures for installing and fine-tuning the mechanical limit switches for gate movement.

Connecting the Device

Wiring instructions for connecting the actuator to the power supply and control unit.

CONTROL UNIT INSTALLATION INSTRUCTIONS

Wiring and Connecting Procedures

Essential safety and connection guidelines for wiring the control unit.

Central Connections Overview

Details terminal descriptions for various inputs and outputs on the control unit.

Electrical Connections Diagram

Visual guide to the electrical connections and component layout of the control unit.

CONTROL UNIT CONFIGURATION

Performing a Full Reset

Steps to perform a complete reset of the control unit's settings.

Initial Configuration Activation

Guide for activating the initial configuration sequence for the gate opener.

REMOTE CONTROLS

Registering a Remote Control

Instructions for programming remote controls to operate the gate.

Disconnecting Remote Controls

Procedures for removing single or all registered remote controls from the system.

OPTIONS

Automatic Closing Setup

How to activate and adjust the automatic closing pause time for the gate.

Slowdown Time Adjustment

Guides on setting the slowdown time for the gate's movement.

SPEED AND SENSITIVITY

Speed Adjustment

How to adjust the operating speed of the gate opener.

Sensitivity Adjustment

Instructions for adjusting the sensitivity of the gate's safety features.

OPTIONS MENU

Configuring Option 1

Details on setting and activating functions within Option 1 menu.

Configuring Option 2

Details on setting and activating functions within Option 2 menu.

MANUAL PROGRAMMING

Setting Closing Limit Switch

Steps to set the mechanical limit switch for the gate's closing position.

Setting Opening and Delay Limit Switch

Procedures for setting limit switches for gate opening and delay.

Setting Closing Delay

How to program the delay time for the gate's closing sequence.

GENERAL INFORMATION

Intended Use

Specifies the intended application of the automatic gate opener.

SAFETY RECOMMENDATIONS AND WARNINGS

General Safety Guidelines

Comprehensive safety recommendations for installation and use.

INSTALLATION RESTRICTIONS

Installation Recommendations and Warnings

Specific recommendations and warnings to follow during installation.

TESTING

USAGE RECOMMENDATIONS AND WARNINGS

MAINTENANCE

Maintenance Recommendations and Warnings

Guidelines and precautions for maintaining the gate opener.

DISASSEMBLY AND DISPOSAL

EasyWay 210 Specifications

General IconGeneral
BrandEasyWay
Model210
CategoryGate Opener
LanguageEnglish