5.2 Disconnecting a single remote control
- Press and hold the remote control programming button for 5 seconds until the left green LED under the “-”
symbol starts blinking.
- Hold the remote control button you wish to disconnect until all five LEDs light up.
5.3 Disconnecting all remote controls
- Press and hold the remote control programming button for 5 seconds until the left green LED under the “-
” symbol starts blinking.
- Press and hold the remote control programming button again for 5 seconds. The LEDs will start blinking
alternately.
- When the LEDs stop blinking, all remote controls will be successfully disconnected.
To Next Page
Loading...