Eaton 9355 UPS (10/15 kVA) User’s Guide 164201594—Rev H0 59
Figure 45. Stabilizing Bracket with Three Cabinets
44..55 IInntteerrnnaall BBaatttteerryy TTrraayy WWiirriinngg CCoonnnneeccttiioonnss
NOTE To reduce electrical safety risks during transportation, the UPS is shipped with the
internal battery tray assemblies disconnected.
DANGER
This UPS contains LETHAL VOLTAGES. All repairs and service should be performed by AUTHORIZED SERVICE
PERSONNEL ONLY. There are NO USER SERVICEABLE PARTS inside the UPS.
WARNING
The UPS is intended to be operated only with batteries installed. When batteries are not installed a stabilizing
bracket is required to prevent a tip hazard.
WARNING
Only qualified service personnel (such as a licensed electrician) should perform the UPS installation. Initial
startup must be performed by an authorized Eaton Customer Service Engineer. Risk of electrical shock.
UPS System Installation
To Next Page
Loading...
