Eaton 9A UPS - Page 10

2
9A UPS 1-3K
Materials Abbreviaons Number in the symbols
Polyethylene terephthalate PET 01
High-density polyethylene HDPE 02
Polyvinyl chloride PVC 03
Low-density polyethylene LDPE 04
Polypropylene PP 05
Polystyrene PS 06
Follow all local regulaons for the disposal of packing materials.
End of life
Eaton will process products at the end of their service life in compliance with local regula-
ons.
Eaton works with companies in charge of collecng and eliminang our products at the
end of their service life.
Product
The product is made from materials that can be recycled.
Dismantling and destrucon must take place in compliance
with all local regulaons con-
cerning waste.
At the end of its service life, the product must be transported to a processing center for
electrical and electronic waste.
Baery
The product contains lead-acid baeries that must be processed according to applicable
local regulaons concerning baeries.
The baery may be removed to comply with regulaons and in view of correct disposal.
01
PET