Eaton 9A UPS - Ups Rack 1-3 Kva

12
9A UPS 1-3K
B-Connecng the EBM
1. Plug the EBM power cable(s) into the baery connector(s). Up to 4 EBMs may be con-
nected to the UPS.
2. Verify that the EBM connecons are ght, and that adequate bend radius and strain
relief exist for each cable.
3. Aer wiring, you have to congure the number of EBM’s by the LCD, please refer to page
21.
3.4 UPS RACK 1-3KVA
A-Checking the accessory kit
Hz
Vac
Hz
Vac
+
OUTPUT LOAD
INPUT BATTERY
ON OFF SELECT ENTER
9A
1
1
2
3
4
5
6
2
3
4
5
6
UPS
Moun�ng kit for 19-inch
enclosures
Instruc�ons and Safety Informa�on
Quick start
Rack kit for 19-inch 4-post
enclosures
RS232 communica�on cable