Eaton 9A UPS - Page 18

10
9A UPS 1-3K
B-Installaon
If you ordered other UPS accessories, refer to specific user manuals to check the
tower installation with the UPS.
1. Place the UPS on a at, stable surface in its nal locaon.
2. Do not block venlaon openings on the UPS’s housing. Ensure the air vents on the front,
side and rear of the UPS are not blocked. Recommended at least 25cm of space on each
side.
C-UPS Connecon
!
Check that the indicaons on the name plate located on the back of the UPS meets
to the AC-power source and the true electrical consumpon of the total load.
Hz
Vac
Hz
Vac
+
OUTPUT LOAD
INPUT BATTERY
ON OFF SELECT ENTER
9A
1