Eaton 9A UPS - Page 31

23
9A UPS 1-3K
Step 4: “MOdE” aer pressing the “Select” buon, press the “Enter” buon to set mode,
then “UPS” ickering.
Step 5: “ECO” ickering aer pressing button the “Select” button.
Step 6: “CVF” flickering after pressing the “Select” again. Press the “Enter” button to make
sure to change the mode. Short touch “Enter” button to exit setting mode.
Hz
+
OUTPUT LOAD
INPUT BATTERY
Vac
+
OUTPUT LOAD
INPUT BATTERY
Hz
+
OUTPUT LOAD
INPUT BATTERY