Eaton Cutler-Hammer FP-5000 - Page 76

IL17569
Page 5-28
Effective June, 2001
Table 5.7 Programmable Logic (continued)
Display Setting Description Setpoint Range/ Default Selected Refer to
Value Selection Setting Value Sec. #
Block 50P-1 IOC Logic gate setting to block 5.5.7
50P-1 IOC operation 9.4
9.6
Function: Select logic function to apply OR, AND, NOR, Disable
to logic gate NAND, Disable
Set Group: Select protection setting group 1, 2, 3, 4 or All 1
for logic gate to apply
IN1: Select logic type for logic input 1 * See Logic Input Options Unused
Table 5.10
IN2: Select logic type for logic input 2 * See Logic Input Options Unused
Table 5.10
IN3: Select logic type for logic input 3 * See Logic Input Options Unused
Table 5.10
IN4: Select logic type for logic input 4 * See Logic Input Options Unused
Table 5.10
Block 50P-2 IOC Logic gate setting to block 5.5.7
50P-2 IOC operation 9.4
9.6
Function: Select logic function to apply OR, AND, NOR, Disable
to logic gate NAND, Disable
Set Group: Select protection setting group 1, 2, 3, 4 or All 1
for logic gate to apply
IN1: Select logic type for logic input 1 * See Logic Input Options Unused
Table 5.10
IN2: Select logic type for logic input 2 * See Logic Input Options Unused
Table 5.10
IN3: Select logic type for logic input 3 * See Logic Input Options Unused
Table 5.10
IN4: Select logic type for logic input 4 * See Logic Input Options Unused
Table 5.10
Block 50P-3 IOC Logic gate setting to block 5.5.7
50P-3 IOC operation 9.4
9.6
Function: Select logic function to apply OR, AND, NOR, Disable
to logic gate NAND, Disable
Set Group: Select protection setting group 1, 2, 3, 4 or All 1
for logic gate to apply
IN1: Select logic type for logic input 1 * See Logic Input Options Unused
Table 5.10
IN2: Select logic type for logic input 2 * See Logic Input Options Unused
Table 5.10
IN3: Select logic type for logic input 3 * See Logic Input Options Unused
Table 5.10
IN4: Select logic type for logic input 4 * See Logic Input Options Unused
Table 5.10