Eaton EDR-5000 User Manual

EDR-5000 IM02602007E
The self-supervision contact has to be wired with the master
communication system (SCADA) in order to supervise and monitor the
state of health of the programmable protective device.
Typical applications for this product family/device line are for example:
Feeder protection;
Mains protection;
Transformer protection and
Machine protection.
This device is not designed for any usage beyond these applications. This
applies also to the use as a partly completed machinery. The manufacturer
cannot be held liable for any resulting damage. The User alone bears the
risk if this device is used for any application for which it was not designed.
As to the appropriate use of the device: the technical data specified by
Eaton Corporation has to be met.
OUT-OF-DATE PUBLICATION
This publication may have been revised or updated since this copy was
produced. To verify that you have the latest revision, be sure to check the
Eaton Corporation website:
http://www.eaton.com
The latest versions of most publications are available at this site.
If the User's publication is not found on the web site, please contact Eaton
Customer Support to get the latest copy.
www.eaton.com 11

Eaton EDR-5000 Specifications

General

Brand	Eaton
Model	EDR-5000
Category	Relays
Language	English