Eaton EDR-5000 - Trend Recorder

EDR-5000 IM02602007E
Direct Commands of the Event Recorder Module
Parameter Description Setting range Default Menu path
Res all rec Reset all records Inactive,
Active
Inactive [Operation
/Reset]
Event Recorder Module Signals
Signal Description
Res all rec Signal: All records deleted
Trend Recorder
Available Elements:
Trend rec
Configuring the Trend Recorder
The Trend Recorder is to be configured within [Device Para/Recorders/Trend Recorder] menu.
The User has to set the time interval. This defines the distance between two measuring points.
The User can select up to ten values that will be recorded.
Global Protection Parameters of the Trend Recorder
Parameter Description Setting range Default Menu path
Resolution Resolution (recording frequency) 60 min,
30 min,
15 min,
10 min,
5 min
15 min [Device Para
/Recorders
/Trend rec]
Observed Value1 Observed Value1 1..n, TrendRecList CT.IA RMS [Device Para
/Recorders
/Trend rec]
www.eaton.com 220