EDR-5000 IM02602007E
Measuring Values
Read Out Measured Values
In the »Operation/Measured Values« menu, both measured and calculated values can be viewed. The measured
values are ordered by »Standard values« and »Special values« (depending on the type of device).
Measurement Display
Menu [Operation\General Settings] offers options to change the display of measured values within the HMI and Power-
Port-E.
Scaling of Measured values
By means of the parameter »Scaling« the user can determine how measured values are to be displayed within the HMI
and
PowerPort-E
:
Per Unit quantities
Primary quantities
Secondary quantities
Power Units (applies only for devices with power measurement)
By means of the parameter »
Power Units«
the User can determine how measured values are to be displayed within the
HMI and
PowerPort-E
:
Power Auto Scaling
kW, kVAr or kVA
MW, MVAr or MVA
GW, GVAr or GVA
www.eaton.com 158
To Next Page
Loading...
