EDR-5000 IM02602007E
Manual Resets
In the
»Operation/Reset«
menu, the User can:
•Reset counters;
•Delete records (e.g.: waveform records); and
•Reset special things (like statistics, thermal replica, etc.).
The description of the reset commands can be found within the
corresponding modules.
Reset to Factory Defaults
This Function will reset the device to the factory defaults.
All records will be deleted and and the measured values and counters will
be reset. The operation hours counter will be kept.
This Function is available at the HMI only.
• Press the »Ack/Rst-key« during a cold start, in order to access the »Reset« menu.
• Select »Reset to factory default«.
• Confirm »Reset device to factory defaults and reboot« with »Yes« in order to execute the reset to factory
defaults.«
www.eaton.com 200
To Next Page
Loading...
