EDR-5000 IM02602007E
Item Graphic Name Description
7
»ACK/RST- Key«
Used to abort changes and to
acknowledge messages as well
as resetting counters.
In order to reset, press the Soft-
key »Wrench« and enter the
password.
The User can exit the reset
menu by pressing the Softkey
»Arrow-left«
8
USB Interface
(PowerPort-E
Connection)
Connection to the
computer/software PowerPort-E
is done via the USB interface.
9
»OK Key« When using the »OK« key,
parameter changes are
temporarily stored. If the »OK«
key is pressed again, those
changes are stored indefinitely.
10
»CTRL Key« Access to the Control menu (not
available in all devices)
www.eaton.com 154
To Next Page
Loading...
