Eaton EDR-5000 - Page 24

EDR-5000 IM02602007E
EDR-5000-2 Eaton Distribution Relay Removable Terminals
EDR-5000-2 A 0 B A 1
Choose from the following options.
Hardware Option 1
8 DI, 11 Outputs, Removable Terminals, Zone Interlocking. A
Hardware Option 2
Phase Current 5A/1A, Ground Current 5A/1A, Power Supply Range: 19-300
Vdc, 40-250 Vac.
0 (Zero)
Phase Current 5A/1A, Sensitive Ground Current 0.5A/0.1A, Power Supply
Range: 19-300 Vdc,
40-250 Vac.
1
Communication Options
Modbus-RTU (RS-485) + DNP3.0 (interface with terminals) B
Modbus TCP + DNP3.0 (Ethernet 100MB / RJ45) C
Modbus RTU + DNP3.0 (Fibre optic interface, ST connector) F
DNP3.0 + Modbus RTU (RS485 / D-SUB interface) G
IEC-61850 (Ethernet 100MB, RJ45) H
Modbus-RTU (interface with terminals) + Modbus-TCP (Ethernet 100MB,
RJ45)
I
IEC61850 / Ethernet 100MB (Single LC connector) K
Conformal Coating Options
None A
Conformal Coated Circuit Boards B
Mounting Options
Standard Mount 0 (Zero)
Projection Panel Mount
1
The catalog number identification table defines the electrical characteristics and operation features included in the
EDR-5000-2. For example, if the catalog number were EDR-5000A0BA1, the device would have the following:
www.eaton.com 24