Eaton EDR-5000 - Page 266

EDR-5000 IM02602007E
Parameter Description Setting range Default Menu path
Config Bin Inp24 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Modbus
/Configb Registers
/States]
Latched Config Bin
Inp24
Latched Configurable Binary Input Inactive,
Active
Inactive [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp25 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Modbus
/Configb Registers
/States]
Latched Config Bin
Inp25
Latched Configurable Binary Input Inactive,
Active
Inactive [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp26 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Modbus
/Configb Registers
/States]
Latched Config Bin
Inp26
Latched Configurable Binary Input Inactive,
Active
Inactive [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp27 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Modbus
/Configb Registers
/States]
Latched Config Bin
Inp27
Latched Configurable Binary Input Inactive,
Active
Inactive [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp28 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Modbus
/Configb Registers
/States]
www.eaton.com 266