Eaton EDR-5000 - Page 272

EDR-5000 IM02602007E
Name Description Assignment via
Config Bin Inp18-I State of the module input: Config Bin Inp [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp19-I State of the module input: Config Bin Inp [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp20-I State of the module input: Config Bin Inp [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp21-I State of the module input: Config Bin Inp [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp22-I State of the module input: Config Bin Inp [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp23-I State of the module input: Config Bin Inp [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp24-I State of the module input: Config Bin Inp [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp25-I State of the module input: Config Bin Inp [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp26-I State of the module input: Config Bin Inp [Device Para
/Modbus
/Configb Registers
/States]
www.eaton.com 272