Eaton EDR-5000 - Page 274

EDR-5000 IM02602007E
Values of the MODBUS
®
Protocol
Value Description Menu path
Mapped Meas 1 Mapped Measured Values. They can be used to provide measured
values to the Modbus Master.
[Operation
/Count and RevData
/Modbus]
Mapped Meas 2 Mapped Measured Values. They can be used to provide measured
values to the Modbus Master.
[Operation
/Count and RevData
/Modbus]
Mapped Meas 3 Mapped Measured Values. They can be used to provide measured
values to the Modbus Master.
[Operation
/Count and RevData
/Modbus]
Mapped Meas 4 Mapped Measured Values. They can be used to provide measured
values to the Modbus Master.
[Operation
/Count and RevData
/Modbus]
Mapped Meas 5 Mapped Measured Values. They can be used to provide measured
values to the Modbus Master.
[Operation
/Count and RevData
/Modbus]
Mapped Meas 6 Mapped Measured Values. They can be used to provide measured
values to the Modbus Master.
[Operation
/Count and RevData
/Modbus]
Mapped Meas 7 Mapped Measured Values. They can be used to provide measured
values to the Modbus Master.
[Operation
/Count and RevData
/Modbus]
Mapped Meas 8 Mapped Measured Values. They can be used to provide measured
values to the Modbus Master.
[Operation
/Count and RevData
/Modbus]
Mapped Meas 9 Mapped Measured Values. They can be used to provide measured
values to the Modbus Master.
[Operation
/Count and RevData
/Modbus]
Mapped Meas 10 Mapped Measured Values. They can be used to provide measured
values to the Modbus Master.
[Operation
/Count and RevData
/Modbus]
www.eaton.com 274