Eaton EDR-5000 - Page 279

EDR-5000 IM02602007E
Direct Commands of the Profibus
Parameter Description Setting range Default Menu path
Reset Comds All Profibus Commands will be reset. Inactive,
Active
Inactive [Operation
/Reset]
Global Protection Parameters of the Profibus
Parameter Description Setting range Default Menu path
Config Bin Inp 1 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Profibus
/Config Bin Inp 1-
16]
Latched 1 Defines whether the Input is latched.
Only available if: Latched = Active
Inactive,
Active
Inactive [Device Para
/Profibus
/Config Bin Inp 1-
16]
Config Bin Inp 2 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Profibus
/Config Bin Inp 1-
16]
Latched 2 Defines whether the Input is latched.
Only available if: Latched = Active
Inactive,
Active
Inactive [Device Para
/Profibus
/Config Bin Inp 1-
16]
Config Bin Inp 3 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Profibus
/Config Bin Inp 1-
16]
Latched 3 Defines whether the Input is latched.
Only available if: Latched = Active
Inactive,
Active
Inactive [Device Para
/Profibus
/Config Bin Inp 1-
16]
Config Bin Inp 4 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Profibus
/Config Bin Inp 1-
16]
www.eaton.com 279