Eaton EDR-5000 - Page 296

EDR-5000 IM02602007E
Direct Commands of the IEC 61850
Parameter Description Setting range Default Menu path
ResetStatistic Reset of all IEC61850 diagnostic counters Inactive,
Active
Inactive [Operation
/Reset]
Global Protection Parameters of the IEC 61850
Parameter Description Setting range Default Menu path
Function Permanent activation or deactivation of module/element. Inactive,
Active
Inactive [Device Para
/IEC61850]
Deadb integr time Deadband integration time. 0 - 300 0 [Device Para
/IEC61850]
Global Parameters of the IEC 61850
Parameter Description Setting range Default Menu path
VirtualOutput1 Virtual Output. This signal can be assigned or visualized
via the SCD file to other devices within the IEC61850
substation.
1..n, Assignment
List
-.- [Device Para
/IEC61850]
VirtualOutput2 Virtual Output. This signal can be assigned or visualized
via the SCD file to other devices within the IEC61850
substation.
1..n, Assignment
List
-.- [Device Para
/IEC61850]
VirtualOutput3 Virtual Output. This signal can be assigned or visualized
via the SCD file to other devices within the IEC61850
substation.
1..n, Assignment
List
-.- [Device Para
/IEC61850]
VirtualOutput4 Virtual Output. This signal can be assigned or visualized
via the SCD file to other devices within the IEC61850
substation.
1..n, Assignment
List
-.- [Device Para
/IEC61850]
www.eaton.com 296