Eaton EDR-5000 - Page 358

EDR-5000 IM02602007E
Name Description
IEC61850.VirtInp12 Signal: Virtual Input (IEC61850 GGIO Ind)
IEC61850.VirtInp13 Signal: Virtual Input (IEC61850 GGIO Ind)
IEC61850.VirtInp14 Signal: Virtual Input (IEC61850 GGIO Ind)
IEC61850.VirtInp15 Signal: Virtual Input (IEC61850 GGIO Ind)
IEC61850.VirtInp16 Signal: Virtual Input (IEC61850 GGIO Ind)
IEC61850.VirtInp17 Signal: Virtual Input (IEC61850 GGIO Ind)
IEC61850.VirtInp18 Signal: Virtual Input (IEC61850 GGIO Ind)
IEC61850.VirtInp19 Signal: Virtual Input (IEC61850 GGIO Ind)
IEC61850.VirtInp20 Signal: Virtual Input (IEC61850 GGIO Ind)
IEC61850.VirtInp21 Signal: Virtual Input (IEC61850 GGIO Ind)
IEC61850.VirtInp22 Signal: Virtual Input (IEC61850 GGIO Ind)
IEC61850.VirtInp23 Signal: Virtual Input (IEC61850 GGIO Ind)
IEC61850.VirtInp24 Signal: Virtual Input (IEC61850 GGIO Ind)
IEC61850.VirtInp25 Signal: Virtual Input (IEC61850 GGIO Ind)
IEC61850.VirtInp26 Signal: Virtual Input (IEC61850 GGIO Ind)
IEC61850.VirtInp27 Signal: Virtual Input (IEC61850 GGIO Ind)
IEC61850.VirtInp28 Signal: Virtual Input (IEC61850 GGIO Ind)
IEC61850.VirtInp29 Signal: Virtual Input (IEC61850 GGIO Ind)
IEC61850.VirtInp30 Signal: Virtual Input (IEC61850 GGIO Ind)
IEC61850.VirtInp31 Signal: Virtual Input (IEC61850 GGIO Ind)
IEC61850.VirtInp32 Signal: Virtual Input (IEC61850 GGIO Ind)
IEC61850.SPCSO1 Status bit that can be set by clients like e.g. the Master Communication System (Single Point Controllable
Status Output).
IEC61850.SPCSO2 Status bit that can be set by clients like e.g. the Master Communication System (Single Point Controllable
Status Output).
IEC61850.SPCSO3 Status bit that can be set by clients like e.g. the Master Communication System (Single Point Controllable
Status Output).
IEC61850.SPCSO4 Status bit that can be set by clients like e.g. the Master Communication System (Single Point Controllable
Status Output).
IEC61850.SPCSO5 Status bit that can be set by clients like e.g. the Master Communication System (Single Point Controllable
Status Output).
IEC61850.SPCSO6 Status bit that can be set by clients like e.g. the Master Communication System (Single Point Controllable
Status Output).
IEC61850.SPCSO7 Status bit that can be set by clients like e.g. the Master Communication System (Single Point Controllable
Status Output).
IEC61850.SPCSO8 Status bit that can be set by clients like e.g. the Master Communication System (Single Point Controllable
Status Output).
IEC61850.SPCSO9 Status bit that can be set by clients like e.g. the Master Communication System (Single Point Controllable
Status Output).
www.eaton.com 358