Eaton EDR-5000 - Page 546

EDR-5000 IM02602007E
Device Planning Parameters of the Current Unbalance Module
Parameter Description Options Default Menu path
Mode Mode Do not use,
Use
Use [Device Planning]
Global Protection Parameters of the Current Unbalance Module
Parameter Description Setting range Default Menu path
ExBlo1 External blocking of the module, if blocking is activated
(allowed) within a parameter set and if the state of the
assigned signal is true.
1..n, Assignment
List
-.- [Protection Para
/Global Prot Para
/Unbalance-Prot
/46[1]]
ExBlo2 External blocking of the module, if blocking is activated
(allowed) within a parameter set and if the state of the
assigned signal is true.
1..n, Assignment
List
-.- [Protection Para
/Global Prot Para
/Unbalance-Prot
/46[1]]
ExBlo TripCmd External blocking of the Trip Command of the module/the
element, if blocking is activated (allowed) within a
parameter set and if the state of the assigned signal is
true.
1..n, Assignment
List
-.- [Protection Para
/Global Prot Para
/Unbalance-Prot
/46[1]]
www.eaton.com 546