Eaton EDR-5000 - Page 742

EDR-5000 IM02602007E
Device Planning Parameters of the Q->&V< Module
Parameter Description Options Default Menu path
Mode Mode Do not use,
Use
Do not use [Device Planning]
Global Protection Parameters of the Q->&V< Module
Parameter Description Setting range Default Menu path
ExBlo1 External blocking of the module, if blocking is activated
(allowed) within a parameter set and if the state of the
assigned signal is true.
1..n, Assignment
List
-.- [Protection Para
/Global Prot Para
/Q->&V<]
ExBlo2 External blocking of the module, if blocking is activated
(allowed) within a parameter set and if the state of the
assigned signal is true.
1..n, Assignment
List
-.- [Protection Para
/Global Prot Para
/Q->&V<]
Power Trip dir By means of this parameter the trip direction of active
and reactive power can be inverted within the QV-Module
(sign reversal).
positive,
negative
positive [Protection Para
/Global Prot Para
/Q->&V<]
www.eaton.com 742