Eaton EDR-5000 - Page 782

EDR-5000 IM02602007E
Global Protection Parameters of the Low-Voltage-Ride-Through
Parameter Description Setting range Default Menu path
ExBlo1 External blocking of the module, if blocking is activated
(allowed) within a parameter set and if the state of the
assigned signal is true.
1..n, Assignment
List
-.- [Protection Para
/Global Prot Para
/LVRT [1]]
ExBlo2 External blocking of the module, if blocking is activated
(allowed) within a parameter set and if the state of the
assigned signal is true.
1..n, Assignment
List
-.- [Protection Para
/Global Prot Para
/LVRT [1]]
ExBlo TripCmd External blocking of the Trip Command of the module/the
element, if blocking is activated (allowed) within a
parameter set and if the state of the assigned signal is
true.
1..n, Assignment
List
-.- [Protection Para
/Global Prot Para
/LVRT [1]]
Inputs of the Low-Voltage-Ride-Through
Name Description Assignment via
ExBlo1-I Module Input State: External Blocking1 [Protection Para
/Global Prot Para
/LVRT [1]]
ExBlo2-I Module Input State: External Blocking2 [Protection Para
/Global Prot Para
/LVRT [1]]
ExBlo TripCmd-I Module Input State: External Blocking of the Trip Command [Protection Para
/Global Prot Para
/LVRT [1]]
www.eaton.com 782