Eaton EDR-5000 - Page 802

EDR-5000 IM02602007E
UFLS Module Signals (Output States)
Signal Description
Active Signal: Active
ExBlo Signal: External Blocking
Fuse Fail VT Blo Signal: Blocked by Fuse Failure (VT)
I1 Release Signal: "I Minimum Current" in order to prevent faulty tripping. Module will be released if the
current exceeds this value.
VLL min Signal: Minimum Voltage
Power Angle Signal: Trigger Phi-Power (Positive Phase Sequence System)
P min Signal: Minimum Value (threshold) for the Active Power
P Blo Loadshedding Signal: Load shedding blocked based on evaluation of active power
f< Signal: Underfrequency threshold
Alarm Signal: Alarm P->&f<
Trip Signal: Signal: Trip
Active AdaptSet Active Adaptive Parameter
DefaultSet Signal: Default Parameter Set
AdaptSet 1 Signal: Adaptive Parameter 1
AdaptSet 2 Signal: Adaptive Parameter 2
AdaptSet 3 Signal: Adaptive Parameter 3
AdaptSet 4 Signal: Adaptive Parameter 4
AdaptSet 5 Signal: Adaptive Parameter 5
www.eaton.com 802