EDR-5000 IM02602007E
Phase and Ground
Current Inputs:
Screws M4, captive type acc. to VDEW
Connection Cross Sections: 1 x or 2 x 2.5 mm² (2 x AWG 14) with wire end ferrule
1 x or 2 x 4.0 mm² (2 x AWG 12) with ring cable sleeve or cable sleeve
1 x or 2 x 6 mm² (2 x AWG 10) with ring cable sleeve or cable sleeve
The current measuring board´s terminal blocks may be used as with 2
(double) conductors AWG 10,12,14 otherwise with single conductors only.
www.eaton.com 903
To Next Page
Loading...
