Eaton EDR-5000 - Page 988

EDR-5000 IM02602007E
Name Description
PF-55A[1].Pickup Signal: Pickup Power Factor
PF-55A[1].Trip Signal: Trip Power Factor
PF-55A[1].TripCmd Signal: Trip Command
PF-55A[1].Compensator Signal: Compensation Signal
PF-55A[1].Impossible Signal: Pickup Power Factor Impossible
PF-55A[1].ExBlo1-I Module Input State: External Blocking
PF-55A[1].ExBlo2-I Module Input State: External Blocking
PF-55A[1].ExBlo TripCmd-I Module Input State: External Blocking of the Trip Command
PF-55A[2].Active Signal: Active
PF-55A[2].ExBlo Signal: External Blocking
PF-55A[2].Blo TripCmd Signal: Trip Command blocked
PF-55A[2].ExBlo TripCmd Signal: External Blocking of the Trip Command
PF-55A[2].Pickup Signal: Pickup Power Factor
PF-55A[2].Trip Signal: Trip Power Factor
PF-55A[2].TripCmd Signal: Trip Command
PF-55A[2].Compensator Signal: Compensation Signal
PF-55A[2].Impossible Signal: Pickup Power Factor Impossible
PF-55A[2].ExBlo1-I Module Input State: External Blocking
PF-55A[2].ExBlo2-I Module Input State: External Blocking
PF-55A[2].ExBlo TripCmd-I Module Input State: External Blocking of the Trip Command
Q->&V<.Active Signal: Active
Q->&V<.ExBlo Signal: External Blocking
Q->&V<.Fuse Fail VT Blo Signal: Blocked by Fuse Failure (VT)
Q->&V<.Pickup Signal: Pickup Reactive Power Undervoltage Protection
Q->&V<.Decoupling Distributed
Generator
Signal: Decoupling of the (local) Energy Generator/Resource
Q->&V<.Decoupling PCC Signal: Decoupling at the Point of Common Coupling
Q->&V<.Power Angle Signal: Admissable power angle exceeded
Q->&V<.Reactive Power Thres Signal: Admissable Reactive Power Threshold exceeded
Q->&V<.VLL too low Signal: Line-to-Line voltage too low
Q->&V<.ExBlo1-I Module Input State: External Blocking1
Q->&V<.ExBlo2-I Module Input State: External Blocking2
ReCon.Active Signal: Active
ReCon.ExBlo Signal: External Blocking
ReCon.Blo by Meas Ciruit
Superv
Signal: Module blocked by measuring cirucuit supervision
ReCon.Release Energy
Resource
Signal: Release Energy Resource.
www.eaton.com 988