i-on16
Page v
Compliance Statement
The i-on16:
Is suitable for use in systems designed to comply with PD6662:2010
at Grade 2, and environmental class II.
Is suitable for use in systems designed to comply with the
requirements of EN50131-3 at Grade 2 and environmental class II.
Complies with the requirements of EN50131-6:2008 at Grade 2 and
environmental class II.
When fitted with the appropriate communicator (see the relevant Installation
Guide) this product is compliant with EN 50136-1. It allows the alarm
transmission system to meet the performance requirements of EN 50131-
1:2006 ATS 2 provided that:
a) It are installed in accordance with the installation instructions.
b) The connected PSTN is functioning normally.
If the installer selects a non-compliant configuration then they must
remove or adjust compliance labelling
Please Note:
This Guide applies to i-on16 control units with version 4.04 software.
To Next Page
Loading...
Need help?
General
