Eaton i-on16 User Manual

i-on16
Page 85
Alarm Functions At a Glance
Setting and Unsetting
IN ORDER TO:
DO THIS:
THE SYSTEM WILL:
Turn the system on:
EITHER:
Key in ACCESS CODE
and press 
OR present tag.
Start the exit tone.
Then leave the premises
and close door.
Stop exit tone and turn on.
Turn the system off:
Open entry door, go to
keypad.
Start entry tone.
At the keypad EITHER:
key in ACCESS CODE
OR: present tag.
Stop entry tone and turn
off.
Turn on part of the system:
EITHER:
Key in ACCESS CODE
OR present tag.
Then press  or .
followed by .
System turns on part of the
system you selected.
For more information see page 19 .
OK
Glowing = On (set)
Off = Off (unset)
Flashing = Part Set
(part setting systems only)
Key in access code
here
Key in access code
here
Display shows:
Time and date when system off (unset).
First zone to alarm after alarm
Read log here.
Hold prox tag near face of keypad.
NO
Navigation:
up, down, left, right
HUA/PA keys

Eaton i-on16 Specifications

General

Brand	Eaton
Model	i-on16
Category	Security System
Language	English