Eaton i-on16 - Proximity Tags

4. Administration i-on16
Page 54
2. Press .


3. Key in your access code (or
present a tag).


4. Press  until you see:.


5. Press .
The bottom line of the display
shows:


6. Press  until you see:


7. Press .
The bottom line of the display
shows:


8. Press  or  to turn a chime tone
on or off.
When the chime tone is on, the
keypads and loudspeakers will
sound a chime tone for each zone
that triggers while you are
performing the walk test.
9. Press . to see the first of the walk
test options:


The Walk Test menu provides two options to give different ways of
organising a walk test. The options within Walk Test are:
System
This option allows you to walk round the entire system and
test all the zones. Press  to select this option.
Zones
This option lets you select one or more individual zones,
and test only those zones and no others.
Press  or  to scroll up and down the list of zones. Press
 or  to display “Yes” at the end of the bottom line to
mark the zone as one you want to test. Press  when you
have finished making your selection.