Eaton i-on16 - Turning Outputs On;Off

i-on16 4. Administration
Page 75
6. Press  until the display shows:


7. Press .


8. Press  until the display shows:


9. Press .
The display shows:


10. EITHER
a) Press the button of the remote
you wish to delete:


OR (if you do not have the remote
to hand.)
a) Press .
The bottom line of the display
shows the first in a list of the known
devices.


b) Press  until the bottom line of
the display shows the remote you
wish to delete.


c) Press .


11. Press .
The keypad gives a double “beep”
confirmation tone. The keypad
display shows:
The control unit deletes the remote
from its memory. The remote can
no longer be used on the system.


followed by:


12. Repeat steps 9 to 11 if you wish to
delete any other remotes.
13. Press  repeatedly to leave the
menu.