UPS Operating Instructions
7-6 Eaton
®
Power Xpert
®
9395P-900 UPS Installation and Operation Manual
P-164000501—Rev 09 www.eaton.com/powerquality
A The UPS status area automatically displays the Eaton model number, current time and date, active alarms,
active notices, and load percent and battery run time for the UPS. If the Eaton Environmental Monitoring
Probe is installed, the temperature and humidity sensed by the probe will also be displayed. The small
head symbol between the system model and time allows the operator select a different language from an
imbedded list.
The top line of the display blinks while scrolling when the system needs attention. Some notices and
alarms may be accompanied by an audible horn. To silence the horn, touch anywhere on the control panel
once. For more information about alarms and notices, see paragraph 7.3.12.
B The information area contains data about UPS status and operations.
C After touching the padlock in the upper right corner, the numerical keypad appears to allow entry of the
system access pass code for operation. See Table 7-2 Security Levels and Functions.
Figure 7-5. Sign In or Password Request Screen
Table 7-2. Security Levels and Functions
Level Name Passcode Description
0 USER NONE USER
1 CONTROL 1111 USER + CONTROL
2 CONFIGURATION 0101 USER + CONTROL + CONFIGURATION
3 SERVICE Service Only USER + CONTROL + CONFIGURATION + SERVICE
A
B
C
ENTER
BUTTON
Number
indicates
security
level 0 - 4
To Next Page
Loading...
