UPS Operating Instructions
Eaton
®
Power Xpert
®
9395P-900 UPS Installation and Operation Manual P-164000501—Rev 09 www.eaton.com/powerquality 7-7
7.3.3 Using the Main Menu Buttons
The UPS menu bar shown in Figure 7-6 allows you to display data in the information area to help you monitor
and control UPS operation. Table 7-3 shows the basic menu structure.
Figure 7-6. Home Screen
Table 7-3. Display Function Menu Map
Menu Option Description
HOME Displays the system status both graphically and within the info bar.
METERS Displays performance meters for the system or critical load.
CONTROLS Allows access to various system performance control screens.
POWER MAPS Allows operator to observe system power flow.
LOGS Allows access to system information logs.
STATISTICS Allows access to see system specific operation values.
SETTINGS
Allows access to various screen controlled variables for system operation. Level 0, 1 and 2 are for user/operator.
Level 3 is used only by service personnel.
NOTE On all screens, Black lines indicate NO power flow, Green lines indicate ACTIVE
power flow, Yellow lines indicates an out-of-tolerance condition.
NOTE Screens shown are representative examples of system operation. The screen data
will vary based on system activity at the time of observation.
Allows selection of
alternate language
To Next Page
Loading...
