Eaton Powerware 9125 - Page 29

INSTALLATION
EATON Powerware
®
9125 (9910-E30) UPS Installation Guide for IBM
®
Applications S 164201696 Rev 1
25
Table 10. Typical Power Connections (Figure 31)
Item Description
1 IEC 320-C20
2 IEC 320-C19
3 IEC 320-C14
4 IEC 320-C13
5 Country-specific power (mains) cord
IBM FC Plug Type Description
9860 11 NEMA L6-20P
9861 11 NEMA L6-20P
9866 18 CEE7 VII
9867 22 SABS 164
9868 25 CEI 23-16
9871 46 IEC309 (P+N+G) 16A
9872 32 SII32-1971
9874 54 SAA-AS 3112
9875 64 IRAM 2073
6 Output power (UPS to device) cords, located in the E30 accessory kit
Qty.
4 IEC 320-C13 to C14, 1.8m (6 ft)
1 IEC 320-C19 to C20, 2.7m (9 ft)
7 Varies: Device country-specific power (mains) cord
IBM
IBM
Mains
Varies
IBM
iSeries or
pSeries
Device
552
IBM
E30
2100W
UPS
Eaton (6)
1
Eaton (6)
IBM
iSeries or
pSeries
Device(s)
3
2
4
4
4
4
2
3
1
4
1
1
4
Second
E30 or
PDU
7 1
7 4
2
3
7
7
7
7
Mains
with TVSS
Dual-redundant power options:
1. Device or PDU to mains (no UPS
protection), then MUST have
Transient Voltage Surge
Suppression (TVSS) on mains.
2. Second E30.
Figure 31. E30 I nternational (IEC) Tower and Worldwide Rack Dual-Redundant Power