OPERATION
EATON Powerware
®
9125 (9910-E30) UPS Installation Guide for IBM
®
Applications S 164201696 Rev 1
34
Normal Mode
During Normal mode, the
μ
indicator illuminates and the front panel
displays the percentage of UPS load capacity being used by the
protected equipment (see Figure 36). The UPS monitors and charges the
batteries as needed and provides power protection to your equipment.
<10%
10–25%
26–50%
51–75%
76–100%
>100%
Figure 36. Load Level Indicators
When all of the bar graph indicators are illuminated and the indicator
flashes, power requirements exceed UPS capacity; refer to
“Troubleshooting” in the Powerware 9125 Two-in-One UPS
(2500/3000 VA) User’s Guide for more information.
To Next Page
Loading...
